| 1. | As the number of cycles of reuse of water increases, salt balance becomes increasingly important .
盐均衡随着水的再利用循环次数的增加而日益变得重要。 |
| 2. | And the number of cycles that pass in one second is the frequency
，而电磁场每秒的震动次数则称为频率。 |
| 3. | Burst mode operation allows for a user - selected number of cycles per period of time
脉冲串模式允许用户选择每段时间的周期 |
| 4. | In traditional production mode , material handling phase takes large number of cycle time and costs
在传统生产方式中，物流环节占用了大量的周期时间和成本。 |
| 5. | The fatigue equation , strain formula and the relationship between the increasing rate of the second - stage strain and the number of cycles are established
建立了相应的疲劳方程、应变公式及第二阶段应变增长率与疲劳寿命间的关系。 |
| 6. | Prior to the linux 2 . 6 kernel , file caching on a linux system could go awry , using a huge number of cycles trying to manage the file cache
对于linux 2 . 6之前版本的内核， linux系统上的文件缓存可能会出差错，需要花费大量的周期来管理文件缓存。 |
| 7. | For adds and subtracts , the average number of cycles required is two , versus about 12 to 15 for the previous type . this is almost a 75 % reduction in execution time : 120 ns versus 400 ns
对于加减法运算所需循环的平均数是2 ，而旧型号机却需12 ? 15 。在执行时间上减少约75 % ，即现在用130纳秒，从前用400纳秒。 |
| 8. | Four benchmark test sequences was used for the simulation , and the average number of cycles required to process a frame of the proposed architecture and average number of reference memory access required per frame has been computed
本文用四个标准测试序列对所设计结构进行了仿真实验,统计了该结构平均完成一次块匹配的时钟周期和平均处理一帧需对参考块数据存储器的访问次数。 |
| 9. | Meanwhile , it was found that there was a relationship between the depletion width and the number of cycles [ n ( 50 % ) ] which the polarization degraded 50 % in the experiment . with this relationship , we can predict the ferroelectric films " service life
并且我们发现修正的损耗层宽度与铁电疲劳极化衰变50的循环次数值[ n ( 50 ) ]有一定关系，可以用这个关系预测铁电薄膜的使用寿命。 |
| 10. | Empirical expressions of the total longitudinal strain and the secant modulus are given . in addition , the relationships of the increasing rate of the total second - stage strain and the decreasing rate of the secant modulus with the number of cycles are obtained respectively
给出了纵向总应变、割线模量的经验公式，及其第二阶段总应变增长率、割线模量衰减率分别与疲劳寿命的经验公式。 |
